Frontier Internet | Wireless Network Setup | Settings

Internet | Wireless Networking

I have a SpeedStream 5200 with version 2 of the firmware. How do I configure the ports for games and applications?

NOTE: Frontier is not responsible for investigating the appropriate ports to forward for any given application or the functionality of applications after port forwarding has been enabled.
  1. Open your web browser and enter the following address: http://192.168.254.254/naptcfg.htm

    Note: If you are not currently logged into your modem, you may need to enter your modem's username and password (typically, admin is both the username and password).
  2. Under Add/Edit entry, select either the service or protocol and TCP/UDP ports, whichever is applicable to your situation. If you select Protocol and TCP/UDP Ports be sure to enter the appropriate range of port numbers for your situation. 
  3. Select either “Redirect Selected Protocol / Service to this Router” or “Redirect Selected Protocol / Service to IP Address”, whichever is applicable to your situation. If you select Redirect Selected Protocol / Service to IP Address, be sure to enter the appropriate IP address for your situation.
  4. Click Apply.
Back
The FiOS® marks are owned by Verizon Trademark Services LLC and used under license.
©2014 Frontier Communications Corporation. All rights reserved.
Was this page easy to find? | Was the information helpful?
Was the Information helpful?
Was this page easy to find?