Frontier Internet | Wireless Network Setup | Settings

Internet | Wireless Networking

I have SpeedStream 5667 with a product number of 161-5667-501 or 161-5667-507. How do I configure the ports for games and applications?

NOTE: Frontier is not responsible for investigating the appropriate ports to forward for any given application or the functionality of applications after port forwarding has been enabled.
  1. Open your web browser and enter the following address: http://192.168.254.254. Enter your modem's username and password (typically, admin is both the username and password).
  2. Click Advanced Setup on the top left of the main page.
  3. Click Port Forwarding on the left-hand side of the window.
  4. Go to the section To add an entry, choose the following:
    • Protocol – Select TCP, UDP, TCP & UDP, or RAW.
    • Raw Protocol Number – Enter the Protocol ID if Raw is selected in the Protocol field.
    • Service – Select a preconfigured service or Port Number if service is not preconfigured.
    • Starting Port Number – Enter the starting port number if Port Number is selected in the Service field.
    • Number of Ports – If only one port must be open, enter 1. If a range of ports must be opened, enter the total number of ports in the range.
    • Server – Enter th local workstation where you want port traffic to go to.
    • Self – Check Self if the port is intended to be opened for access to the router itself.
  5. Click Add Service and wait for request to be completed.
  6. Click Firewall on the left margin — make sure firewall mode is set to Low (Factory Default).
  7. Click Save Configuration on the top left of the screen.
Back
The FiOS® marks are owned by Verizon Trademark Services LLC and used under license.
©2014 Frontier Communications Corporation. All rights reserved.
Was this page easy to find? | Was the information helpful?
Was the Information helpful?
Was this page easy to find?