Program My FiOS Remote

If you're a new FiOS® customer, here’s everything you need to know to get your remote to work with your Set-Top Box. Use either of the methods listed below. The step-by-step instructions show you how.

Code Search method Manual method
  1. Turn on both TV and FiOS Set-Top Box.
  2. Press and hold both OK and LIVE TV buttons, then release both at same time. Red LED light blinks twice and stays on.
  3. Press and hold PLAY (Play button on your FiOS remote) while remote control tries different TV codes. Red LED light blinks.
  4. When TV turns off, release PLAY (Play button on your FiOS remote) immediately.
  5. Turn on TV by pressing TV Power (TV power button on your FiOS remote) then press VOL+ and VOL- to see if TV responds. Also test MUTE and A/V. If any button doesn't work, press and hold until it does.
  6. Press OK to save code programming. Red LED light blinks 3 times and turns off. You have successfully programmed remote control for your TV.
  1. Turn on both TV and FiOS Set-Top Box.
  2. Locate 3-digit code for your TV brand on page 2 of  FiOS TV Remote User Guide. Can't find your code? Use Code Search method instead.
  3. Press and hold both OK and 0 until red LED light on remote blinks twice and stays on.
  4. Enter 3-digit TV code. Red LED light blinks twice and stays on.
  5. Press and release CH+ button repeatedly* until TV turns off.
    *Note: Some TVs respond slower than others. Allow at least 1 second between button presses.
  6. Turn on TV by pressing TV Power (TV power button on your FiOS remote) then press VOL+ and VOL- to see if TV responds. Also test MUTE and A/V. If any button doesn't work, press and hold until it does.
  7. Press OK to save code programming. Red LED light blinks 3 times and turns off. You have successfully programmed remote control for your TV.
If you experience any problems with either method, check the following:
  • If TV Power button (TV power button on your FiOS remote) does not work, manually turn on TV and go back to Step 1.
  • If you press CH button and remote's lights flash rapidly, programming hasn't been successful. Go back to Step 1.
  • If VOL, MUTE or A/V buttons do not work, see Remote Control Troubleshooting.
  • Want to start over? Press Exit button. Red LED light will turn off.
  • Note: After 60+ seconds if no buttons are pressed, remote automatically exits programming mode.
¿Aún necesitas ayuda? Llama al 1.877.600.1512 o Chatea en vivo

Artículos recomendados

Mi decodificador

Tu equipo de FiOS® está compuesto por un decodificador con o sin DVR (grabador de video digital), y un control remoto. Aquí encontrarás las instrucciones para usar ...

Leer más
FiOS TV Channel and User Guides

FiOS® offers a wide variety of programming. Find out about programming in languages other than English. The following guides will help you get familiar with your services and your ...

Leer más
Troubleshooting

Find out how to reset or reboot your FiOS® TV equipment and how to fix a pixelated or tiled TV image, plus read troubleshooting tips for your remote control. If your on-screen guide is ...

Leer más