How to program and use your Frontier TV remote control

1. Turn on your TV and set-top box.
2. Press and hold the OK and Live TV buttons, then release both at the same time. The red LED light will blink twice and stay on.
3. Enter 922 on the remote’s keypad, then press and hold Play.
4. When your TV turns off, release Play immediately.
5. Press Enter on the keypad to save the code. Your remote is now programmed.

1. Turn on your TV and set-top box.
2. Locate the 4-digit code for your TV brand in the Frontier TV Remote Control Manual. Can’t find your code? Use the code search method instead.
3. Press and hold OK and TV buttons. Release both buttons to enter code setup mode.
4. Enter the 4-digit TV code.

1. Turn on the TV using the TV button.
2. Adjust the volume, check the Mute button.
3. Make sure you can enter channel numbers and that you can connect to the right channel.
4. Try the Input or TV/Video button.
5. Once it is all working, press Okay to save the code programming. The red LED will blink three times then turn off.
6. Your remote is now programmed.

If your remote was unable to find the code:

• If the automatic search did not work, try a manual search. Refer to the instructions shown above.

If any functions aren't working:

• Press and hold that button and release it as soon as it works. When the functions work properly, press OK to save the code. The red LED will blink three times and then turn off.